Features
- USB or parallel port interface with auto-switch
power
- Support 5V and 3.3V low voltage devices, 1.8V
chip support through low voltage adapter.
- Less then 2 seconds per Mbit Programming speed
for high density flash chip.
- No adapter required for DIL chip up to 48-pin
- 48-pin universal pin driver and current limit
- Auto-sense/ Self programming with statistical
report
- Device insertion /continuity check
- Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP
and 40/48 TSOP
- Supports OS : Windows 95 / 98 / ME / NT / 2000
/ XP / Vista(32bit) / 7(32bit) (Parallel port)
Windows 98SE / ME / 2000 / XP / Vista(32bit) /
7(32bit / 64bit) (USB port)
- Automatic EPROM/ Flash ID search
- Serialization for Memory/μP chip
- Memory buffer H / L byte swap
- Project file save / load function
- User-selectable verify Vcc with one or two-pass
verify voltage
- Automatic file format detection and conversion
- User-changeable programming parameters
- 1 year warranty
- Software update via web
Universal pin driver--No adapter required
for DIL devices
The LabTool-48UXP features universal pin driver,
each pin can supply four different voltage, ground,
it also can be configurable as TTL high/low levels
with pull-high/pull-low, high-speed clock and high
impedance. This advanced pin design lets you program
any DIL device of up to 48 pins without needing
an adapter.
Unbeatable programming speed
The LabTool-48UXP's on-board intelligence reduces
system overhead to a minimum. The LabTool-48UXP
has 100% more performance then its predecessor product
in program the high density flash chip, it can program
a Intel 32 M bit flash chip in less then 60 seconds.
Programming Speed Test Report
| |
Intel 28F320C3B |
AMD 29DL323DB |
| Blank check |
18.6 sec |
18.9 sec |
| Program |
57.5 sec |
76.2 sec |
| Verify |
32.5 sec |
33.0 sec |
| Total |
108.6 sec |
128.1 sec |
The LabTool-48UXP is much faster than its competitors,
making it much more productive with today's high
density, multi-megabit memory devices.
Technological innovation and performance
leadership
Device insertion and contact checks--No
mistakes!
The LabTool-48UXP performs device insertion and
contact checks before it programs each device. It
can detect poor pin contact and devices inserted
upside down or in the wrong position. This function
protects your pocketbook by preventing expensive
chip damage due to operator error.
EPROM and Flash memory ID detection and
Search
Many EPROM and Flash memories have a build-in device
ID and manufacturer ID. The LabTool-48UXP can read
the device's ID by press hot key to detect the ID
and compare its database and determined the chip's
correct vendor and product number. This feature
is especially useful with secondhand chips and devices
that have had their part number accidentally (or
intentionally) removed (this function only applied
to 28 pin or 32 pin EPROM and Flash).
Auto-sensing and self-programming
To meet mass-production requirements the LabTool-48UXP
has implemented new patented technology in both
its hardware and software. After entering the Mass-production
Mode, the production line operator inserts a device
into the ZIF socket. An LED on the LabTool-48UXP
indicates the device is ready and the operator simply
removes it and replaces it with a new one. No formal
training is necessary adding flexibility and saving
time and money. In addition, the LabTool-48UXP's
auto-sensing feature ensures the device has been
inserted correctly and then automatically programs
the device. Furthermore, in the mass-production
mode the system keyboard is automatically disabled
preventing the operator from making any inadvertent
mistakes.
Project file save and load
User can create and save a project file which contains
device selection, buffer data and all the programming
set-up options, this project file can be called
upon at any time for future use without having to
go through the setting up procedure again, your
design file can easily pass to production department
without making any mistake.
Serialization function
If your memory devices need individual serial numbers
with different increment sequence and initial value,
the LabTool-48UXP has an Auto Increment function.
This simply increments the serial numbers in the
buffer each time a new device is inserted. This
saves time and money.
User-selectable verify voltage, one or two-pass
verification
The LabTool-48UXP lets you select the verify voltage
after you have programmed the device, e.g., Vcc,
Vcc ±5%, Vcc ±10%. The Vcc voltage can be 2.0V to
6.5V. This feature ensures that your device has
been programmed properly, preventing failures due
to programming errors and ensuring data retention.
Non-DIL device support through versatile
converters
The LabTool-48UXP's universal pin driver capability
lets it program all 48-pin DIL devices, including
all single-chip Micro-controllers, without DIL-to-DIL
adapters. However there are many different packages
beside DIL package, such as PLCC, SOP, TSOP, QFP
and SDIP. We have developed over 100 different adapters
to support these special-package devices.
Software update via web
The LabTool-48UXP has additional safety features
such as a built-in current limit and pin continuity
check function. This prevents damage from faulty
chips during the programming cycle. Software updates
via web .
Universal 44-pin PLCC, QFP, PSOP and TQFP
adapter supports 44-pin chips
The universal pin driver on the LabTool-48UXP enables
you to support all 44-pin chips such as EPLD, EPROM,
Flash, EPLD and Micro-controllers. You need only
one 44-pin universal adapter which eliminates the
need to buy multiple adapters and saves money. Moreover,
different package devices within 48 pins will only
require one adapter.
Low voltage chip support
The LabTool-48UXP support 2.0V ~ 5.0V logic level
input/output, and it can supply 2.0V~21V analog
voltage (such as VCC). Support lower then 2.7V low
voltage chip such as 1.8V also possible by special
low voltage adapter on top of its 48 pin ZIF socket.
Specifications
Socket and pin driver
48-pin DIL/ ZIF socket with receptacle for 8-pin
to 48-pin 300/ 600-mil devices.
Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit
resolution. Software controllable rises time and
current limit protection.
Logic driver supports pull-up/ pull-down or high
impedance on all 48 pins with 2.0V-5V level.
Device support
Memory : PROM, EPROM, EEPROM, Flash, Serial PROM,
NVRAM
Logic: PAL, GAL, CEPAL, PEEL, CDLD, EPLD
Others: OTP/Flash Micro-controllers
Device operations
Read, blank check, device insertion/ contact check,
verify, checksum, EPROM ID check, compare, erase
chip, function test, program, memory protect, device
configuration setting, device search, edit buffer,
mass production mode, modify vector, serialization,
H/L byte buffer swap, buffer search.
PLD vector tester
Accepts JEDEC test vectors up to 48 pins
2500V/usec. rise time
File format conversion
JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola
S, HP 64000ABS, Straight Hex and TEKTRONIC Hex,
Automatic detection and conversion.
PC system requirements
Operating system: Windows 95/98/Me,2000, Windows
XP or Windows NT (Parallel port)
Windows 98SE/Me,2000,Windows XP (USB port)
Processor: Pentium and above
128 MB RAM minimum, 512 MB recommended
Hard disk with 100 MB free space
Parallel port with EPP mode or USB port
CD ROM driver
General
Power: 100 to 240 VAC, auto-switching
Frequent range : 47 to 63 Hz
Power consumption : 25 W
Operating temperature: 5 to 45 ℃ (41 to 113℉)
CE & LVD certified
Weight: 1.8KG
|
|
| |
Sales
Hotline : (+86) 10-85405215 sales E-mail :market@deltasoft.com.cn
Technical support hotline: (+86) 10-86060987 Technical
support E-mail:support@deltasoft.com.cn
Address : No.1510,13th Building,ShuangQiGanDongLi,XiCheng District,Beijing,China
Immediate purchase
- Download center
- Contact us
© 2006 Beijing Delta Technology Development Co., Ltd
|
